[flext] Setting up xcode for flext!

[Thomas Grill]

Hi Oscar,
the fact that you "can't get any instance" can have several reasons. Again, a screenshot or the PD console with the -verbose option on startup would be helpful.
As for debugging of an external: this is indeed where i fire up xcode.
gr~~~

Am 15.12.2012 um 16:48 schrieb Òscar Martínez Carmona:

> Hey, me again, 
> Finally I got the flext buildsystem working and compiled some of the examples succesfully. Now I'm trying to compile an external "of my own" (not really mine, actually it's a ripoff of someother guy (a nicer one)). The thing is that I got it compiled but when I call it from pd (after putting the dylib on the extra folder) I can't get any instance!
> What could I be doing wrong? There's any way for debugging the external?? 
> Thanx!
> 
> 
> On Wed, Dec 12, 2012 at 11:26 PM, Òscar Martínez Carmona <xamps23 at gmail.com> wrote:
> Yeah. Now it's working, I changed the path into /Developer and restarted the whole thing again following the steps and now I have built one of the examples,  got it running on PD, so I guess now it works fine!!
> Thanx!
> 
> 
> On Wed, Dec 12, 2012 at 11:04 PM, Thomas Grill <gr at grrrr.org> wrote:
> So, have you run "bash build.sh pd gcc" before trying to install it?
> gr~~~
> 
> Am 12.12.2012 um 22:36 schrieb Òscar Martínez Carmona:
> 
>> So true, here it goes:
>> 
>> XmP-s-MAC-289:flext xmp$ sudo bash build.sh pd gcc install
>> make -f ./buildsys/gnumake-sub.mak  PLATFORM=mac RTSYS=pd COMPILER=gcc BUILDPATH=./buildsys/ PKGINFO=package.txt BUILDCLASS=flext USRCONFIG=config.txt USRMAKE=build/gnumake-mac-gcc.inc TARGETMODE=release TARGETTYPE=single _install_
>> buildsys/mac/gnumake-gcc-targets.inc:22: warning: overriding commands for target `pd-darwin/release-single'
>> buildsys/mac/gnumake-gcc-targets.inc:18: warning: ignoring old commands for target `pd-darwin/release-single'
>> install pd-darwin/release-single/libflext-pd_s.0.5.2.a /usr/local/lib
>> install: pd-darwin/release-single/libflext-pd_s.0.5.2.a: No such file or directory
>> make[1]: *** [_install_] Error 71
>> make: *** [install-release-single] Error 2
>> 
>> Hope this helps!
>> Thanx so much!
>> 
>> 
>> 
>> On Wed, Dec 12, 2012 at 7:23 PM, Thomas Grill <gr at grrrr.org> wrote:
>> Hi Oscar, without knowing what your errors are (console output), it's absolutely impossible to help you.
>> gr~~~
>> 
>> Am 12.12.2012 um 19:12 schrieb Òscar Martínez Carmona:
>> 
>>> Hey, I'm trying the flext build system but not succesfully. I got stuck when I try to build flext, seems that I'm making some mistake when I build it  entering "bash build.sh pd gcc" i got some errors (2) so I guess that why it doesn't let me installing it afterwards.
>>> Any suggestion? Could be possible to use flext into Eclipse IDE?
>>> Thanx!
>>> 
>>> 
>>> On Wed, Dec 12, 2012 at 4:25 PM, Òscar Martínez Carmona <xamps23 at gmail.com> wrote:
>>> Hey Thomas, 
>>> Sincerely I haven't done that. I started with the xcode template that was in the package I got from flext site. I've written some silly externs in C following the tutorial on pd's site, and it was fairly easy with xcode, so I thougth that with flext could be similar. I'll try what you suggest, thanx for the advice!
>>> I'll right back with more questions, no doubt about it!! 
>>> 
>>> 
>>> On Tue, Dec 11, 2012 at 8:42 PM, Thomas Grill <gr at grrrr.org> wrote:
>>> Hi Oscar,
>>> using xcode is certainly not the easiest way to use flext.
>>> Have you tried the flext build system after reading through flext/readme.txt and flext/build.txt?
>>> gr~~~
>>> 
>>> Am 11.12.2012 um 19:43 schrieb Òscar Martínez Carmona:
>>> 
>>> > Hi list!
>>> > I'm a newby to flext and by now I've written some simple external test based on the tutorials in "flext Intro" stuff.
>>> > The thing is I can't achieve its compilation cause I haven't setup propperly the whole thing.
>>> > I'm looking for some "idiot-proof" tutorial on that subject or maybe some "retard-oriented" advice!
>>> > I really need some step-to-step explanation on setting Xcode and all the stuff.
>>> > Thanx so much!
>>> >
>>> > --
>>> > Òscar Martínez Carmona
>>> >
>>> > _______________________________________________
>>> > http://grrrr.org/ext/flext
>>> >
>>> > flext mailing list
>>> > flext at grrrr.org
>>> > http://grrrr.org/cgi-bin/mailman/listinfo/flext
>>> 
>>> --
>>> Thomas Grill
>>> http://grrrr.org
>>> 
>>> 
>>> 
>>> 
>>> -- 
>>> Òscar Martínez Carmona
>>> 
>>> 
>>> 
>>> 
>>> -- 
>>> Òscar Martínez Carmona
>>> 
>> 
>> --
>> Thomas Grill
>> http://grrrr.org
>> +43 699 19715543
>> 
>> 
>> 
>> 
>> -- 
>> Òscar Martínez Carmona
>> 
> 
> 
> --
> Thomas Grill
> http://grrrr.org
> +43 699 19715543
> 
> 
> 
> 
> -- 
> Òscar Martínez Carmona
> 
> 
> 
> 
> -- 
> Òscar Martínez Carmona
> 

--
Thomas Grill
http://grrrr.org
+43 699 19715543

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://grrrr.org/pipermail/flext/attachments/20121216/63ee64bf/attachment.htm>