[flext] source/flbase.cpp:1:0: error: CPU you selected does not support x86-64 instruction set

[Jonghyun Kim]

solved. In the "config-lnx-pd-gcc.txt" cpu setting was false. I have x64
cpu, but that was pentium4.

#OFLAGS+=-march=pentium4
OFLAGS+=-march=x86-64

Thanks,
akntk

On Sat, Jan 10, 2015 at 11:34 AM, Jonghyun Kim <agitato816 at gmail.com> wrote:

> I installed both pd-vanilla and pd-extended.
>
> When I type in terminal *"pd"*, then it runs *pd-extended*. To run
> *pd-vanilla*, I have to type *"puredata"*. Can it be a problem on
> compiling?
>
> akntk
>
> On Sat, Jan 10, 2015 at 11:19 AM, Jonghyun Kim <agitato816 at gmail.com>
> wrote:
>
>> Hi,
>>
>> I'm trying compile pd_leapmotion.pd_linux. I tried "bash build.sh pd gcc"
>> and I've got error. How to solve this error?
>>
>> The important error msg:
>> ==========================
>> g++ -c  -msse -mfpmath=sse -ffast-math -DFLEXT_USE_CMEM -O3
>> -march=pentium4   -I/usr/include/pd -pthread -fPIC
>> -fvisibility-inlines-hidden -DFLEXT_USE_SIMD -DNDEBUG -DFLEXT_EXPORTS
>> -DFLEXT_SYS=2 -DPD -I~/src/pd-0.46-4//src -I~/src/pd-0.46-4//include
>> -I~/src/pd-0.46-4//include/pd source/flbase.cpp -o
>> pd-linux/release-single/flbase.opp
>> *source/flbase.cpp:1:0: error: CPU you selected does not support x86-64
>> instruction set*
>> * /**
>> * ^*
>> *source/flbase.cpp:1:0: error: CPU you selected does not support x86-64
>> instruction set*
>> *make[1]: *** [pd-linux/release-single/flbase.opp] Error 1*
>> *make[1]: Leaving directory `/home/akntk/Downloads/pd_leapmotion/flext'*
>> *make: *** [build-release-single] Error 2*
>> =========================
>>
>> below more information
>>
>> Many thanks,
>> akntk
>>
>>
>>
>>
>>
>> my setup===================================
>> Ubuntu 14.04 64Bit
>> Linux umi 3.13.0-43-generic #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014
>> x86_64 x86_64 x86_64 GNU/Linux
>>
>> Flext ver 0.5.2 (Jan. 10, 2015)
>>
>> config.txt==================================
>> # comment out to inhibit SIMD (Altivec/SSE) usage
>> SIMD=1
>>
>> config-lnx-pd-gcc.txt==========================
>> # where is the PD source package?
>> # (this should point to the main folder, which has a "src" (PD Vanilla)
>> or "include" (PD extended) subfolder)
>> #PDPATH=/usr/local/src/pd
>> PDPATH=~/src/pd-0.46-4/
>>
>> ###############################################################
>>
>> # prefix for flext installation
>> # headers are in $(FLEXTPREFIX)/include/flext
>> # libraries are in $(FLEXTPREFIX)/lib
>> # build system is in $(FLEXTPREFIX)/lib/flext
>>
>> FLEXTPREFIX=/usr/local
>>
>> ###############################################################
>>
>> # where should the external be built?
>> OUTPATH=pd-linux
>>
>> # where should the external be installed?
>> #INSTPATH=/usr/local/lib/pd/extra
>> INSTPATH=/usr/lib/pd/extra
>>
>> ###############################################################
>>
>> # STK (synthesis tool kit) support
>> # http://ccrma.stanford.edu/software/stk
>>
>> # where to find the STK header files (e.g. stk.h)
>> ####disabled!!####STK_INC=/usr/local/include/stk
>>
>> # where to find the STK library (normally libstk.a)
>> # (comment out STK_LIB if you don't use STK)
>> #STK_LIB=/usr/local/lib/libstk.a
>>
>> ###############################################################
>>
>> # SndObj support
>> # http://music.nuim.ie//musictec/SndObj
>>
>> # where to find the SndObj header files (e.g. sndobj.h)
>> ####disabled!!#####SNDOBJ_INC=/usr/local/include/sndobj
>>
>> # where to find the SndObj library (normally libsndobj.a)
>> # (comment out STK_LIB if you don't use SndObj)
>> #SNDOBJ_LIB=/usr/local/lib/libsndobj.a
>>
>> ###############################################################
>>
>> # make flags (e.g. use multiprocessor)
>> #MFLAGS=-j 2
>>
>> # user defined compiler flags
>> # (check if they match your system!)
>> UFLAGS=-msse -mfpmath=sse -ffast-math
>> # don't overload new and delete operators
>> UFLAGS+=-DFLEXT_USE_CMEM
>>
>> # user defined optimization flags
>> # (check if they match your system!)
>> OFLAGS=-O3
>> # optimizations for Pentium 4
>> OFLAGS+=-march=pentium4
>>
>>
>> =========================================
>> build err msg===============================
>> akntk at umi:~/Downloads/pd_leapmotion/flext$ bash build.sh pd gcc
>> make -f ./buildsys/gnumake-sub.mak  PLATFORM=lnx RTSYS=pd COMPILER=gcc
>> BUILDPATH=./buildsys/ PKGINFO=package.txt BUILDCLASS=flext
>> USRCONFIG=config.txt USRMAKE=build/gnumake-lnx-gcc.inc TARGETMODE=release
>> TARGETTYPE=single _build_
>> make[1]: Entering directory `/home/akntk/Downloads/pd_leapmotion/flext'
>> mkdir -p pd-linux/release-single/
>> g++ -c  -msse -mfpmath=sse -ffast-math -DFLEXT_USE_CMEM -O3
>> -march=pentium4   -I/usr/include/pd -pthread -fPIC
>> -fvisibility-inlines-hidden -DFLEXT_USE_SIMD -DNDEBUG -DFLEXT_EXPORTS
>> -DFLEXT_SYS=2 -DPD -I~/src/pd-0.46-4//src -I~/src/pd-0.46-4//include
>> -I~/src/pd-0.46-4//include/pd source/flbase.cpp -o
>> pd-linux/release-single/flbase.opp
>> *source/flbase.cpp:1:0: error: CPU you selected does not support x86-64
>> instruction set*
>> * /**
>> * ^*
>> *source/flbase.cpp:1:0: error: CPU you selected does not support x86-64
>> instruction set*
>> *make[1]: *** [pd-linux/release-single/flbase.opp] Error 1*
>> *make[1]: Leaving directory `/home/akntk/Downloads/pd_leapmotion/flext'*
>> *make: *** [build-release-single] Error 2*
>> akntk at umi:~/Downloads/pd_leapmotion/flext$
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://grrrr.org/pipermail/flext/attachments/20150110/aa5143b8/attachment-0001.html>